Practise › Questions › The first law of thermodynamics
The first law of thermodynamics questions
For a fixed mass of gas, the first law relates heat transfer, change in internal energy and work done: heat in equals internal energy gained plus work done by the gas. Four special processes each reduce one term to zero, and a curve on the p-V diagram turns work into an area you can measure.
17 original questions · 51 marks · the the first law of thermodynamics notes · Engineering physics
On this topic the library is tagged for AQA, CIE, OCR A.
Every question here is written for this library rather than taken from a past paper. Write your answer out before opening a mark scheme: the schemes award marks point by point, and the marks are easier to see when you have something of your own to compare against.
State the first law of thermodynamics, and state what Q and W each stand for in the form used at A-level.
Mark scheme
Q = ΔU + W (1). Q is the heat supplied to the gas, ΔU the increase in its internal energy, and W the work done by the gas on its surroundings (1). Getting these two directions the right way round is what the sign of every later answer depends on.State what is meant by the internal energy of an ideal gas, and state the one property of the gas that fixes it.
Mark scheme
It is the total kinetic energy of the random motion of its molecules (1). An ideal gas has no intermolecular potential energy, so its internal energy depends only on its absolute temperature (1).State which term of the first law is zero for a change at constant volume, and which is zero for an isothermal change, giving a reason in each case.
Mark scheme
Constant volume: W = 0, because the gas does not move its surroundings, so no work is done (1). Isothermal: ΔU = 0, because the temperature is unchanged and the internal energy of an ideal gas depends only on temperature, so Q = W (1).State what is meant by an adiabatic change, and give one practical example.
Mark scheme
A change in which no heat enters or leaves the gas, Q = 0, achieved by good insulation or by acting too quickly for heat to flow (1). Examples: the compression stroke of a diesel engine, or the barrel of a bicycle pump warming as you pump (1).Explain why the work done by an expanding gas is equal to the area under the curve on a p-V diagram.
Mark scheme
For a small increase in volume δV the gas does work p δV, the area of a thin strip under the curve (1). Adding all such strips between the initial and final volumes gives the total work, which is the area under the curve (1). Only at constant pressure does this reduce to the single rectangle pΔV.State the sign of W in Q = ΔU + W when a gas is compressed.
Mark scheme
W is negative (1), because W means the work done by the gas and here the surroundings do work on it instead.A gas absorbs 850 J of heat while expanding and does 320 J of work on its surroundings. Calculate the change in its internal energy and state whether its temperature rises or falls.
Mark scheme
ΔU = Q − W (1) = 850 − 320 = +530 J (1). The internal energy has risen, and for an ideal gas that means the temperature rises (1), though by less than 850 J of heating alone would give, because 320 J left as work.The area under the p-V curve for an expanding gas is estimated by counting squares: 34 squares, each representing 25 J. During the expansion 1200 J of heat is supplied to the gas. Calculate the work done by the gas and the change in its internal energy.
Mark scheme
W = area under the curve = 34 × 25 = 850 J (1). ΔU = Q − W (1) = 1200 − 850 = +350 J (1). Counting squares is an accepted method here; pΔV would only serve if the pressure were constant.A gas is compressed adiabatically, 500 J of work being done on it. State the value of Q, calculate the change in internal energy, and state what happens to the temperature of the gas.
A gas at a pressure of 2.4 × 105 Pa occupies 3.0 × 10−3 m3. It expands isothermally to 8.0 × 10−3 m3. Calculate the final pressure and state, with a reason, the direction of the heat flow.
Air at 1.0 × 105 Pa fills 6.0 × 10−4 m3 of a cylinder and is compressed adiabatically to 1.2 × 10−4 m3. Calculate the final pressure. Take γ = 1.4.
A gas is sealed in a rigid container and supplied with 1200 J of heat. It is then cooled, losing 400 J of heat. For each stage state the work done by the gas and calculate the change in internal energy, and give the overall change.
A gas expands at a constant pressure of 8.0 × 104 Pa, its volume increasing from 1.5 × 10−3 m3 to 6.5 × 10−3 m3, while 620 J of heat is supplied. Calculate the work done by the gas and the change in its internal energy.
A fixed mass of gas is taken round the following four-stage cycle. From A (1.0 × 105 Pa, 1.0 × 10−3 m3) it is heated at constant volume to B (3.0 × 105 Pa). From B it expands at constant pressure to C (3.0 × 10−3 m3). From C it is cooled at constant volume to D (1.0 × 105 Pa). From D it is compressed at constant pressure back to A. Calculate the work done by the gas in each stage, the net work per cycle, and the net heat supplied per cycle.
In a diesel engine, air at 1.0 × 105 Pa and 300 K fills 9.0 × 10−4 m3 of a cylinder and is compressed adiabatically to 5.0 × 10−5 m3. Take γ = 1.4. Calculate the final pressure and the final temperature, and explain why no spark plug is needed.
A gas expands from the same initial state to the same final volume, once isothermally and once adiabatically. Explain which expansion does more work, and account for the difference using the first law.
A fixed mass of gas undergoes three changes in succession. First it absorbs 500 J of heat at constant volume. Then it expands isothermally, doing 380 J of work. Finally it is compressed adiabatically, 260 J of work being done on it. Calculate the change in internal energy in each change and the overall change, and show that the ledger balances.
The same practice on paper: the printable workbook for this topic, questions and a worked answer book.
Practise the first law of thermodynamics one question at a time
The player marks nothing for you. It shows one question, waits, then shows the scheme so you can mark yourself, and brings a question back sooner when it went badly.