Practise › Questions › The physics of the ear
The physics of the ear questions
The faintest sound you can hear moves your eardrum by less than the width of an atom, and the loudest you can bear carries a million million times the power. No linear scale survives that, so the ear does not use one, and neither does the instrument that measures it.
17 original questions · 51 marks · the the physics of the ear notes · Medical physics
On this topic the library is tagged for AQA.
Every question here is written for this library rather than taken from a past paper. Write your answer out before opening a mark scheme: the schemes award marks point by point, and the marks are easier to see when you have something of your own to compare against.
State what is meant by the intensity of a sound wave, give the equation defining it, and state its unit.
Mark scheme
Intensity is the power carried by the wave through unit area at right angles to its direction of travel (1). I = P/A, measured in W m−2 (1).State what is meant by the threshold of hearing, and give its value.
Mark scheme
The minimum intensity that a normal ear can detect, quoted at a frequency of 1 kHz (1). Its value is I0 = 1.0 × 10−12 W m−2 (1). The frequency is part of the definition, and answers that omit it lose the mark.Describe the path taken by a sound from the air outside the ear to the nerve impulses that leave it, naming the outer, middle and inner sections.
Mark scheme
Outer ear: the pinna collects the sound and funnels it along the ear canal to the eardrum, which vibrates (1). Middle ear: the three ossicles carry the vibration from the eardrum across to the smaller oval window. Inner ear: the oval window drives the fluid in the cochlea, where hair cells convert the vibration into nerve impulses (1).State what an equal loudness curve shows, and state what quantity is plotted on each axis.
Mark scheme
It joins the combinations of frequency and intensity level that a listener judges to be equally loud (1). Intensity level in dB is plotted against frequency, on a logarithmic frequency axis (1).Calculate the intensity level of a sound of intensity 1.0 × 10−6 W m−2.
Mark scheme
Intensity level = 10 log(I/I0) = 10 log[(1.0 × 10−6)/(1.0 × 10−12)] (1) = 10 log(106) = 60 dB (1).State the approximate range of frequencies that a healthy young person can hear.
Mark scheme
About 20 Hz to 20 kHz (1). The upper limit falls with age long before the lower one does.A sound has an intensity of 3.0 × 10−5 W m−2. Calculate its intensity level.
Mark scheme
I/I0 = (3.0 × 10−5)/(1.0 × 10−12) = 3.0 × 107 (1). Intensity level = 10 log(3.0 × 107) (1) = 75 dB (1).A sound is measured at 85 dB. Calculate its intensity.
Mark scheme
85 = 10 log(I/I0), so I/I0 = 108.5 (1) = 3.16 × 108 (1). I = 3.16 × 108 × 1.0 × 10−12 = 3.2 × 10−4 W m−2 (1).A tone of intensity level 66 dB falls on an eardrum of cross-sectional area 55 mm2. Calculate the power incident on the eardrum.
Explain how the middle ear increases the pressure of the vibration reaching the inner ear, and state why this increase is necessary.
Sound A has an intensity of 4.0 × 10−6 W m−2 and sound B an intensity of 8.0 × 10−5 W m−2. Calculate how many decibels louder B is than A.
Explain why sound is measured on a logarithmic scale rather than a linear one.
Describe how an equal loudness curve is produced.
On an equal loudness curve, a tone of frequency 100 Hz has to be at an intensity level of 60 dB to sound as loud as a 1 kHz tone at 30 dB. Calculate the ratio of the intensity of the 100 Hz tone to that of the 1 kHz tone, and explain what this shows about the ear. State where on such a curve the ear is most sensitive.
A machine in a workshop produces an intensity level of 92 dB at a bench. A second, identical machine is switched on beside it. Calculate the new intensity level at the bench, and determine how many such machines would be needed to raise the level to 102 dB.
A worker is exposed to a noise of 96 dBA. Ear defenders reduce the intensity reaching the ear by a factor of 250. Calculate the intensity level inside the defenders, and explain why a workplace noise limit is written in dBA rather than in dB.
Compare the equal loudness curves of a person with normal hearing with those of a person who has spent years working in a noisy factory, and explain the practical difficulty the second person is likely to report.
The same practice on paper: the printable workbook for this topic, questions and a worked answer book.
Practise the physics of the ear one question at a time
The player marks nothing for you. It shows one question, waits, then shows the scheme so you can mark yourself, and brings a question back sooner when it went badly.